Logic 9.1.1 ist da!

[klangsulfat]

Via Softwareaktualisierung

Logic Pro 9.1.1 Update

* This update delivers improved compatibility and numerous fixes.
* Issues addressed include:
o - Improved stability of the 32-Bit Audio Unit Bridge
o - Compatibility with Novation's Automap feature in 64-bit mode.
o - Compatibility with Euphonix Eucon protocol in 64-bit mode.
* Issues addressed include:
o - Support for 64-bit native mode
o - Compatibility with 64-bit Audio Unit plug-ins
o - File names with over 32 characters are now supported
o - Samples are now mapped correctly when using the "Contiguous Zones" option in the EXS editor
* Updated System Requirements:
o - 32-bit mode requires Mac OS X 10.5.7 or later
o - 64-bit mode requires Mac OS X 10.6.2 or later
* The update is recommended for all users of Logic Pro 9.

Hier sind die Release Notes: http://support.apple.com/kb/TS2565?viewlocale=en_US

[MarkDVC]

Ein Update für Logic Express gibt es auch, ebenfalls auf 9.1.1:

http://www.apple.com/downloads/macosx/a ... ss911.html

http://www.apple.com/logicexpress/download/

Gruß

Mark

[trancekid]

cool, aber was soll den der unsinn ?

- Newly created software instrument tracks now include an EVP88 instrument plug-in by default.

[Petrosil]

Via Softwareaktualisierung
Logic Pro 9.1.1 Update

Das Update auf 9.1.1 steht ebenfalls für Logic Express zur Verfügung. Mit 64 Bit und offenbar allen Fixes die bisher nur in Logic Pro verfügbar waren.

Release notes:

Logic Express 9.1.1 Update

This update improves overall stability, provides numerous fixes and enhancements, and is recommended for all users of Logic Express 9.

Some issues addressed in this update include but are not limited to:

Compatibility

• Exported Open TL files no longer sometimes contain unexpected noise bursts.
• The jog wheel on Euphonix MC Control now works as expected in scrub mode.
• The EuCon control surface scribble strip now shows values when moving a fader with EuCon version 2 software.
• Logic now correctly recognizes the virtual HUI MIDI ports when using Novation's Automap feature.
• The Control Surface Setup window now only lists devices for which MIDI plug-ins are installed.
• Resolves an issue that sometimes caused Logic to quit unexpectedly when adjusting parameters in Sonnox Oxford plug-ins.
•Logic no longer quits unexpectedly when a control surface is used to remove a send from a channel strip.


MIDI Editing

• Reverse Position in the Transform window now works as expected.
• The Hyper Draw lane in the Piano Roll now properly maintains its size when the Piano Roll is closed and then reopened.
• The operation labeled "Rel. Crescendo" in the Transform Window now works correctly in all cases.
• Crescendo operations in the Transform window now correctly account for region position.
• Fixes a rare issue in which importing a Hyperset into a project may cause it to not load the next time.


Instruments and Effects

• There is no longer an unexpected burst of noise when switching to certain Amp Designer plug-in settings during playback.
• It is now possible to manually add up to the maximum of 10 stompboxes to a Pedalboard after loading a plug-in setting that contains another Pedalboard with 10 stompboxes.
• Newly created software instrument tracks now include an EVP88 instrument plug-in by default.
• Resolves an issue that could lead to hanging notes when using side chain from a bus.
• The Contiguous Zones setting when loading samples into EXS24 now works as expected.
• Resolves an issue in which some key commands did not work when certain Audio Unit plug-in windows were in the foreground.
• Selecting EXS instruments with a period in the name no longer causes the Library to jump to the top level.
• Resolves an issue in which the Compare button needed a second click to be disabled with some GarageBand synthesizer plug-ins.
• Resolves an issue in which the Compare button stopped working with some GarageBand synthesizers after it was enabled and disabled more than once.
• Resolves an issue In Logic 9.0.1 in which the Input Volume slider on the External Instrument or I/O plug-ins would jump to -24 db if any negative value was set.
• Resolves an issue in Logic 9.0.1 in which an I/O plug-in inserted on an Aux channel strip did not route incoming audio correctly.
• The menu is more responsive when using Find to search for an EXS instrument.

File Handling and Management

• Copy/Convert of 48kHz MP3 files now maintains the correct sample rate when you choose "Original sample rate."
• Import of SMPTE-locked regions now works as expected.
• Resolves an issue in which Logic's search functionality would ignore character matches where the case was different
• Resolves an issue in which Logic would sometimes stop responding for a long time when opening a large number of files using the Add Audio Files command from the Bin.
• It is now posssible to drag and drop presets from the Finder onto the Pianoteq Audio Unit plug-in GUI.
• Save now works correctly when saving Logic 7 projects with the same name and path.
• The File Browser no longer displays hidden Unix folders.
• File names with over 32 characters are now supported.
• The file selector now correctly defaults to the Audio folder in the current Project folder when attempting to locate missing audio files.
• The Audio Bin now correctly shows the entire path for audio files in projects with long names.
• Resolves an issue in Logic 9.0.1 where exported files with a single tempo contained two tempo markers.
• Drag and drop from plug-in GUIs now works as expected.

General Issues

• Resolves an issue that caused some pop-up menus to respond slowly.
• CPU performance at high sample rates has been improved.
• The Undo menu now updates properly to consistently show the next available undo step.
• The Nudge Region/Event Position Right/Left by 10ms key commands now work as expected.
• Portions of audio regions with fades now transpose properly with Follow Tempo enabled.
• Changes to the Input Monitoring buttons on multiple channel strips in the Mixer are now reliably shown on all corresponding channel strips in the Arrange window.
• Resolves an issue that prevented using the contextual menu to change the channel strip assigned to an Arrange track.
• Resolves an issue in which recording would incorrectly appear to continue after "Disk too slow" alerts.
• Resolves an issue that leads to automation data being copied incorrectly when a region was copied to a position adjacent to an existing region.
• The Flatten, Unpack, and "Unpack to New Tracks" key commands now work correctly for MIDI take folders.
• SMPTE locked regions are now placed correctly when imported into a project that has a different SMPTE start time than the project in which they were created.
• Double-clicking the position of a marker in the Marker List no longer causes it to unexpectedly shift position when the project start is earlier than 1 1 1 1.
• The key command "Show/Hide All Regions" in the Audio Bin now works correctly.
• It is now possible to dither when the Sample Rate is set to "Original sample rate" when using "Copy/Convert Files" in the Audio Bin.
• Newly recorded Take folders are now always open when recording on a single track.
• Logic no longer stops responding when Repeat Section is used twice.
• Resolves an issue in which Logic quit unexpectedly if Complex was enabled in the Track Inspector on a track assigned to a Group (with Groups disabled).
• Resolves an issue in which an alert message sometimes appeared if the playhead was moved prior to using Beats From Region in the Beat Mapping track.
• Resolves an issue in which Logic might quit unexpectedly when writing automation from a plug-in GUI while in Touch mode if Automation View mode was active.
• Undo now works correctly after deleting a region with Shuffle Left mode enabled.
• Resolves an issue in which "Slice at Transient Markers" only worked if Flex mode was enabled, disabled, and then enabled again.
• Replace mode recording no longer intermittently removes the entire second region when punching in over portions of two adjacent regions.
• "Drum Replacement/Doubling" no longer sometimes leads to "Out of Memory" alerts.
• Resolves an issue in which some Audio Unit plug-in GUIs would incorrectly separate from the Logic plug-in HUD after using File operations from the Audio Unit GUI.
• Creating four automation nodes with Shift-Option-Control and rubber band selection now properly leaves the middle 2 nodes selected.
• Using Repeat Section in projects where the start position is earlier than 1 1 1 1 no longer sometimes moves automation nodes.
• Chase of automation now works reliably in projects and templates created by older versions of Logic.
• Automation written over existing automation on grouped tracks using a control surface is now plays back as expected.
• Assigning a send to a new bus with Logic Control now creates a new Aux channel strip as expected.
• Latch mode automation now behaves correctly when Link is active for the Plug-in GUI and automation view is enabled in the Arrange window..
• The Q-reference button now disappears as expected when a track is removed from a phase-locked automation group.
• Resolves an issue in which there were sometimes short audio dropouts when quantizing audio in Slicing mode.
• Flattening Take Folders on grouped tracks no longer converts quantize markers to Flex markers.
• It is now possible to create a marker less than a beat away from an existing marker with the "Create Marker without rounding" key command.
• The Hide All Regions key command now works as expected in the Audio Bin.
• Nudge key commands now work as expected in the Signature List.
• The "Zoom to Fit All Contents" and "Zoom to Fit Selection" key commands now work properly in the Piano Roll.
• There is now a key command to set the Flex tool.
• Deselecting items now consistently works as expected in the Audio Window.
• Japanese characters now display correctly in plug-in title bars.
• Dialog sheets are no longer intermittently hidden by plug-in GUIs.
• The Sample Editor now correctly links to new files created by the "Convert Regions to New Audio Files" command in the Arrange window.
• Insert Multiple now works as expected in the Score window when the Pencil tool is used as the Command key tool.
• Resolves an issue in which take lanes would rarely not show active comps.
• Resolves issues in which dividing and copying grouped tracks with Take folders caused regions to be incorrectly shortened and grouping to be lost in some limited circumstances.
• Rubber band selection of Takes on grouped tracks now works correctly.
• Track import now works correctly when importing multi-timbral channel strips.
• Importing tracks with the Content box unchecked no longer creates empty regions when the source tracks contain Take folders.
• Importing tracks with Content enabled no longer creates duplicate channel strips for each take lane in the source project.
• Outputs for Bus channel strips imported with routings from Logic 7 projects are now assigned to Stereo instead of having no output destination.
• Importing Bus channel strips with routings from Logic 7 projects no longer creates duplicate Bus channel strips.
• Recalling a screen set no longer reduces the size of the Arrange window if the tool bar is set to display "Icon only" or "Text only."
• The Select Empty Regions command no longer sometimes improperly removes regions or disables loops in the Arrange window.
• Fades are now displayed at the correct position over the region waveform in projects that start before position 1 1 1 1.
• The Strip Silence window is no longer empty when used in one project and then opened in another during the same session.
• Flatten and Merge of takes on grouped tracks now always creates regions of the same length.
• Resolves an issue in Logic Express 9.0.1 in which it was not possible to create three flex markers by clicking the lower half of a region, after quantization had been applied to the region.
• Resolves an issue in Logic Express 9.0.1 in which Option-drag to copy a region on an Aux channel strip created a duplicate track in the Arrange.
• It is now possible to open a Multi Instrument editor window on Mac OS X v10.6.
• It is now possible to quantize takes on grouped tracks.
• Resolves an issue in Logic Express 9.0.1 in which using the Strip Silence key command could cause Logic to quit unexpectedly.
• Resolves an issue in which disabling the Q reference button track that contains a region that has been stretched and then divided could cause the length of the region to change.
• Resolves an issue in Logic Express 9.0.1 in which using the Use button in the Audio to MIDI Groove template with a flexed region could cause Logic to quit unexpectedly.

[Petrosil]

Ein Update für Logic Express gibt es auch, ebenfalls auf 9.1.1:

Du warst schneller, aber ich detaillierter

[Petrosil]

cool, aber was soll den der unsinn ?

- Newly created software instrument tracks now include an EVP88 instrument plug-in by default.

Das ist in MainStage schon länger drin. Und wenn Du Dir die ständig wiederkehrenden Posts zum Thema "ich krieg da bei Software Instruments keinen Ton raus" ansiehst macht es einen gewissen Sinn. Geht in die gleiche Richtung wie bei MIDI-Dateien automatisch Software Instruments zu laden. Anfängerkompatibel sozusagen

Grüße, Manfred

[Saxer]

cool, aber was soll den der unsinn ?

- Newly created software instrument tracks now include an EVP88 instrument plug-in by default.

finde ich ganz ok... ich habe im autoload auch immer eins drin. dann kann man ohne zu überlegen immer gleich in die tasten hauen.

macht ja trozdem nicht mehr arbeit, ein anderes instrument zu laden.
insofern: hauptsache egal.

[Novatlan]

Schön, dass da noch was kam. Und sogar mit einigen echt netten Fixes. Vor allem EuCon (siehe Meckerei im anderen Thread) und mp3-Export finde ich echt toll.
Jetzt nur noch Track Folders wie in DP und allen anderen Sequencern, dann bin ich happy. Vielleicht in Logic 10 :)

[Axel]

cool, aber was soll den der unsinn ?

- Newly created software instrument tracks now include an EVP88 instrument plug-in by default.

ich denke doch, dass man einen default channelstrip umdefinieren kann?!

[MarkDVC]

Du warst schneller, aber ich detaillierter

Stimmt - hauptsache ist, die Logic Express Users wissen bescheid :D

Gruß

Mark

[midiac]

Dann will ich auch der erste sein, der sich für die Nörgelei wegen des fehlenden LE-Supports
vorbehaltlos entschuldigt! :D

Gruss

Stefan

[superflo]

Hui, eine ganze Latte an Bugfixes. Bei deren schierer Anzahl fragt man sich, wie man mit einer Version vor 9.1.1. arbeiten konnte ;-).

[yoctoyotta]

cool, aber was soll den der unsinn ?

- Newly created software instrument tracks now include an EVP88 instrument plug-in by default.

Das ist in MainStage schon länger drin. Und wenn Du Dir die ständig wiederkehrenden Posts zum Thema "ich krieg da bei Software Instruments keinen Ton raus" ansiehst macht es einen gewissen Sinn. Geht in die gleiche Richtung wie bei MIDI-Dateien automatisch Software Instruments zu laden. Anfängerkompatibel sozusagen

Grüße, Manfred

Offenbar wird kein EVP geladen, wenn man "Open Library" abgeschaltet hat.
Sehr gut!
Jetzt fehlt nur noch, dass "#default" auch bei channel strip settings geht...
dann würde ich "Open Library" bei Software Instruments vielleicht benutzen... :hm_big_smile:

[Bruce Dickinson]

Yay! Der extranervige Notenhängerbug ist endlich verschwunden! Dann hat es sich doch gelohnt, vom G5 auf intel zu wechseln...

[alexander]

find ich jedenfalls extrem geil dass logic hier so frequently upgedated wird. das macht spass.